
Colorbond Roof Profiles for a New Roof: Custom Orb, Trimdek and Klip-Lok Compared by AWS Roofing
Choosing between Colorbond roof profiles comes down to three things: the pitch of your roof, the look you want and how the sheets are held down. For most homes on the NSW Central Coast, the choice is between Custom Orb, Trimdek and Klip-Lok. AWS Roofing installs all three in Colorbond and Zincalume steel, and this guide compares them side by side so you can pick the right sheet for your new roof.
Many homeowners start thinking about profiles after years of living with an old roof. You may have had the same leak patched two or three times, or the old tiles or sheets may simply be past their life. Roof repairs only go so far. When the roof needs replacing, the profile you choose shapes how the new roof looks and performs for decades.

What Are Colorbond Roof Profiles?
A Colorbond roof profile is the shape the steel sheet is rolled into. Colorbond is the steel and its colour coating. The profile is the pattern of ribs or curves pressed into it. Lysaght, which rolls Custom Orb, Trimdek and Klip-Lok, describes itself as a shaper of Colorbond steel.
The profile also decides how flat your roof can be. Colorbond explains on its roofing page that the profile of the roofing material determines the minimum pitch it can be laid at. A corrugated profile typically needs at least 5 degrees, while some profiles can go as low as 1 degree. That one fact rules some profiles out on low or skillion roofs before looks even come into it.
Custom Orb, Trimdek and Klip-Lok Compared Side by Side
The table below uses the figures Lysaght publishes on its profile pages for the standard version of each sheet. Cover width is how much roof each sheet covers once it is laid. Rib height is how tall the ribs stand. Minimum roof slope is the lowest pitch Lysaght lists for that sheet.
| Profile | Look | Cover width | Rib height | Minimum roof slope | How the sheets are held down |
|---|---|---|---|---|---|
| Custom Orb | Classic corrugated ripple | 762mm | 16mm | 5 degrees | Screws pass through the sheet |
| Trimdek | Bold trapezoidal ribs with fluted pans | 762mm | 29mm | 2 degrees | Screws pass through the sheet |
| Klip-Lok 406 | Bold ribs rising from wide, fluted pans | 406mm | 41mm | 1 degree | Hidden clips, no exposed screws |
| Klip-Lok 700 Hi-Strength | Bold ribs rising from wide, fluted pans | 700mm | 43mm | 1 degree (subject to design provisions being met) | Hidden clips, no exposed screws |
Lysaght lists several Klip-Lok versions, and not every version is sold in every state. On its Klip-Lok page, Klip-Lok 406 and Klip-Lok 700 Hi-Strength are both listed as available in New South Wales. When you compare quotes, ask which version of each profile is being quoted.
Custom Orb Roof: Is Corrugated Still a Good Choice?
Yes. Lysaght calls Custom Orb the original corrugated steel profile, trusted by Australians for generations. It suits a wide range of styles, from heritage homes to new builds, and it is the look many people picture when they think of a Colorbond roof.
Custom Orb can be installed flat or sprung curved, which makes it a good fit for curved roof sections. For a bullnose curve, the Lysaght Custom Orb guide points to Custom Blue Orb, because Custom Orb is not intended for machine curving. The ripple is low, at 16mm, so the roof reads as soft and even from the street. The main limit is pitch. With a minimum roof slope of 5 degrees, Custom Orb is not the right sheet for a very low skillion roof or a near flat extension.
Custom Orb is a good match if your roof has a reasonable pitch and you want a traditional look. It also suits homes where the new roof should sit comfortably beside older corrugated roofs in the street.

Trimdek Roof: Why Is It So Popular on New Roofs?
A Trimdek roof is popular because it suits low pitches and gives a clean, modern line. Lysaght describes Trimdek as having bold trapezoidal ribs and subtle fluting in the pans. It is suitable for roof pitches from as little as 2 degrees. That opens it up to skillion roofs, extensions and pergola roofs where Custom Orb would be too flat.
Trimdek has a strong spanning capacity, which Lysaght says permits wide support spacings and can reduce the framing needed. The ribs stand at 29mm, almost twice the height of Custom Orb, so the roof has a more defined, striped look. As our metal roofing page explains, Trimdek comes in long lengths, so on most roofs one sheet can run from the ridge to the gutter without end laps.
Trimdek is a sound choice for contemporary homes, low pitched roofs and outdoor roofs. On a recent Gosford pergola roof, AWS Roofing used 0.48 Trimdek in Colorbond Ironstone with two sheets of tinted polycarbonate to let light through. You can read more about that project in our guide to pergola and verandah roof replacement on the Central Coast.
Klip-Lok Roofing: When Do Hidden Clips Make Sense?
Klip-Lok makes sense on very low pitched roofs and on homes where you want no screws showing on top. Lysaght says Klip-Lok uses a concealed system of clips for supreme watertightness. It is suited to near flat roof planes, from large commercial buildings to low pitched residential rooflines. The tall ribs and wide pans give a crisp, architectural finish.
Because the clips sit under the sheet, there are no screw heads through the top of the roof. Klip-Lok 406 and Klip-Lok 700 Hi-Strength are listed with a minimum roof slope of 1 degree, the lowest of the three profiles. Klip-Lok does need careful planning around anything that goes through the roof, such as whirlybirds or solar brackets. Our post on Klip-Lok installation best practices covers this in more detail.
Klip-Lok is also a common choice on commercial buildings, where long, low roofs are the norm. If you are planning a new roof for a shed, workshop or business, our commercial roofing page explains how AWS Roofing approaches larger projects.
How Do You Choose the Right Colorbond Roof Profile for Your Home?
Start with the pitch of your roof, then choose the look. The pitch tells you which profiles are possible, and the style of your home tells you which one will look right. These questions help narrow it down:
- Roof pitch: below 5 degrees rules out Custom Orb, and below 2 degrees leaves Klip-Lok.
- Style of the home: a traditional or heritage home often suits Custom Orb, while a modern home often suits Trimdek or Klip-Lok.
- Screws on show: if you want no exposed screws, Klip-Lok is the profile with hidden clips.
- Curves: if the roof has a curved section, Custom Orb can be sprung curved.
- Matching other roofs: a new verandah or extension roof often looks best in the same profile as the main roof.
- Colour: Lysaght notes that the full Colorbond colour range is offered on Custom Orb and Trimdek, while colour availability can vary by profile and location on Klip-Lok.
When you get a quote, ask for the profile and the Colorbond or Zincalume product by name. That makes it easy to compare quotes fairly, because two roofs that sound the same on paper can use quite different sheets. AWS Roofing quotes are free and set out the scope in writing, so you know what is included before any work begins.
Do Colorbond Roof Profiles Change for Homes Near the Beach?
The profile stays the same, but the steel underneath may change. Colorbond gives a simple guide for homes near the ocean. If your home is more than 200 metres from breaking surf, standard Colorbond steel is recommended. Between 100 and 200 metres from breaking surf, Colorbond Ultra steel is the recommended material, measured from the high water mark.
Lysaght lists the Ultra range alongside Custom Orb, Trimdek and Klip-Lok. Colorbond also says real performance depends on local conditions, including prevailing winds and areas that are not washed by rain. For homes closer than 100 metres to the surf, Colorbond points to its own technical bulletin on steel roofing selection. This matters on the Central Coast, where plenty of homes sit close to the beaches. Our guide to the best roofing option for Central Coast homes looks at coastal-grade steel and local conditions suburb by suburb.
Choosing a Profile When You Replace an Old Roof
A re-roof is the best time to choose a new profile, because the old roof comes off completely. If you are moving from concrete or terracotta tiles, you are not tied to any existing sheet, so any profile that suits the pitch is possible. Our tile to metal roof conversion page explains how a tile roof is replaced with a new Colorbond roof.
For many homeowners, a re-roof comes after years of roof repairs. The same leak comes back after every patch, or the old sheets are rusting through. At that point the conversation moves from the old roof to the new one, and the profile is one of the first choices to make. You can see how a full replacement runs, from stripping the old roof to installing new sheets, sarking and flashings, on our roof replacement page.
Colour is the other big decision. Colorbond lists 22 core colours, including 6 in a matt finish. Colours on a screen are only approximate, so it helps to see a real sample on the profile you have chosen. Browse the range on our Colorbond colours page, or pop into our Charmhaven showroom at 3/3 O’Hart Cl, Charmhaven NSW 2263 to see Colorbond colours in person.
Frequently Asked Questions
Which Colorbond roof profile is best for a low pitched roof?
Klip-Lok and Trimdek are the profiles for low pitched roofs. Lysaght lists Klip-Lok 406 and Klip-Lok 700 Hi-Strength at a minimum roof slope of 1 degree, and Trimdek at 2 degrees. Custom Orb needs at least 5 degrees, so it is not suited to very flat skillion roofs.
What is the difference between Trimdek and Custom Orb?
Custom Orb is the classic corrugated ripple, with a 16mm rib and a minimum roof slope of 5 degrees. Trimdek has bold trapezoidal ribs, 29mm high, and can go down to 2 degrees. Both cover 762mm per sheet. Custom Orb suits traditional homes and curves, and Trimdek suits modern homes and lower pitches.
Does Klip-Lok have exposed screws?
No. Klip-Lok sheets are held down by concealed clips under the sheet, so there are no screw heads through the top of the roof. Lysaght says this clip system gives supreme watertightness. Lysaght’s installation guides for Custom Orb and Trimdek explain that on those two profiles the screws pass through the sheeting into the supports.
Should I use Colorbond Ultra if I live near the beach?
It depends on your distance from breaking surf. Colorbond recommends standard Colorbond steel more than 200 metres from breaking surf, and Colorbond Ultra steel between 100 and 200 metres. Closer than that, Colorbond refers to its technical bulletin on steel roofing selection.
Are all Colorbond colours available in every profile?
Not always. Lysaght says the entire Colorbond colour range is available on popular profiles such as Custom Orb and Trimdek. For Klip-Lok, Lysaght notes that colour availability can vary by profile and location. It is worth checking the colour and profile together on your quote.
Get a Free Quote for a New Colorbond Roof
If you are weighing up Custom Orb, Trimdek or Klip-Lok for a new roof, AWS Roofing can help you choose the profile that suits your pitch, your home and your location. AWS Roofing is licensed (licence 247575C), fully insured and WorkCover accredited, and the work comes with a written warranty. Have questions about a new roof? We’re happy to chat. Get in touch for a free, no-obligation quote.
Our Services
Get A Free Quote
Contact us today for a free, no-obligation quote on your roofing project.
